Connecting to Wi-Fi
Wi-Fi is available as a data connection method
and is often faster than cellular data networks.
Connecting to Wi-Fi is especially useful in
areas with limited or no cellular connectivity.
To ensure fast, reliable delivery of software
and map updates, Tesla recommends leaving
your vehicle connected to a Wi-Fi network
whenever possible (for example, if parked in
your garage overnight).
To connect to a Wi-Fi network:
1. Touch the cellular icon (usually LTE or 3G)
on the top corner of your touchscreen.
Model Y will start scanning and display the
detected Wi-Fi networks that are within
range.
2. Select the Wi-Fi network you want to use,
enter the password (if necessary), then
touch Confirm.
3. Your vehicle connects to the Wi-Fi
network and will automatically connect to
it whenever the network is within range.
You can also connect to a hidden network that
isn't shown on the list of scanned networks.
Just touch Wi-Fi Settings, enter the name of
the network in the resulting dialog box, select
the security setting, then touch Add Network.
Note: If more than one previously connected
network is within range, Model Y connects to
the one most recently used.
Note: You can also use a mobile hotspot or
your phone's Internet connection via Wi-Fi
tethering (subject to fees and restrictions of
your mobile carrier).
Note: At Tesla Service Centers, Model Y
automatically connects to the Tesla Service
Wi-Fi network.
Connecting to Wi-Fi
Using the Touchscreen 149
To Next Page
Loading...
