Dashcam
About Dashcam
Note: Dashcam is a BETA feature.
In addition to supporting Autopilot features,
the cameras can record and store video
footage on a USB flash drive. This can be
convenient in situations where you want a
video recording of a particular incident, such
as a collision. You can pause, resume, or save
video recordings directly from your vehicle’s
touchscreen.
Note: Dashcam only works when Model Y is
powered on (see Starting and Powering O on
page 55). Dashcam does not record video
when your vehicle is powered o.
Using Dashcam
Dashcam requires the use of a properly
formatted USB flash drive to store and retrieve
footage (see USB Flash Drive Requirements
for Videos and Recording on page 143). Once
a properly formatted USB flash drive has been
inserted into one of your vehicle's front USB
ports, a dashcam icon appears at the top of
the touchscreen. Touch the dashcam icon to
control dashcam:
RECORDING. Tap the dashcam
icon, when dashcam is paused, to
start recording video on the flash
drive.
PAUSED. Press and hold the
dashcam icon, when recording, to
pause recording. Ensure that
dashcam is paused before
removing the flash drive to avoid
losing camera footage.
SAVED. Tap the dashcam icon,
when recording, to archive the
most recent ten minutes of video.
These saved video recordings are
not overwritten by new recordings.
Note: Dashcam automatically begins recording
when you insert a properly configured USB
flash drive into one of the front USB ports.
USB Flash Drive Requirements for
Videos and Recording
To store video from your vehicle's cameras,
follow these requirements and guidelines for
using flash drives:
• The
flash drive must have a sustained
write speed of at least 4 MB/s. A
sustained write speed is dierent from the
peak write speed. Check the product
details of your flash drive for more
information.
• The flash drive must be USB 2.0
compatible. If using a USB 3.0 flash drive,
it must be able to support USB 2.0.
• Use a dedicated flash drive exclusively for
saving Sentry Mode recordings.
• The flash drive must be properly
formatted (see Formatting the USB Flash
Drive on page 144).
• Use a flash drive with as much available
storage as possible. Video footage can
occupy a large amount of space. Tesla
recommends using a flash drive with at
least 32 GB of storage. Some personal
computer operating systems may be
unable to format flash drives larger than
32 GB as FAT 32. Consider using a third
party application to format flash drives
larger than 32 GB.
Although not a comprehensive list, Tesla has
testing the following flash drives and
confirmed that they meet the requirements for
using Dashcam and Sentry Mode:
• SanDisk Ultra Fit USB 3.1 Flash Drive
• Samsung MUF-64AB/AM FIT Plus –
200MB/s USB 3.1 Flash Drive
Formatting the USB Flash Drive
To correctly save and retrieve video footage,
Model Y requires the USB flash drive to be
formatted as FAT 32 (for Windows), MS-DOS
FAT (for Mac), ext3, or ext4. NTFS and exFAT
are not currently supported. In addition, the
USB flash drive must contain a base-level
folder called “TeslaCam” (without quotation
marks). Follow the steps below to prepare a
USB flash drive.
For MacOS:
1. Insert the USB flash drive into your
personal computer.
2. Navigate to Utilities > Disk Utility (or
conduct a Spotlight Search).
3. Select your flash drive in the left menu.
4. Navigate to Erase in the top menu ribbon.
Dashcam
78 Model Y Owner's Manual