Adjusting and Folding Second Row
Seats
Model Y provides seating for up to three
passengers in the second row. Use the
adjustment handles on the outside corner of
each outboard seating position to adjust the
corresponding seat backs. The seat back is
split 60/40 so the adjustment handle on the
left side moves the seat backs for both the left
and center seating positions, whereas the
handle on the right side moves the rightmost
seat back only. While pulling and holding the
handle, move the seat back to the desired
position, and then release the handle. Ensure
the seat back is securely latched into position
by pushing it forward and rearward.
To maximize cargo space, each second row
seat back can be folded fully forward to lay
flat. While pulling and holding the handle,
push the corresponding seat back fully
forward.
Note: Before folding seats fully forward,
remove any items from the seats and the rear
footwell. To allow the seat backs to fold
completely flat, you may need to move the
front seats forward.
Note:
Driving with the rear seats folded
forward may increase perceivable noise
and/or vibration coming from the rear of the
vehicle (trunk, suspension, etc.).
To allow you to carry long items (such as skis)
in the rear of Model Y, the center seat back
can also be independently folded forward. Pull
the handle on the rear of the seat back. The
seat back unlatches and can be pushed
forward.
You can also fold the second row seat backs
fully forward by pressing the corresponding
switch located on the left side of the rear
trunk area. Pressing the switch causes the seat
back to swing forward. You can then push it
downward so it lays fully flat.
Front and Rear Seats
Seating and Safety Restraints 29
To Next Page
Loading...
