Vehicle security
4-8 Doors, locks, and security
Setting the security PIN
With the hand brake engaged, touch
the SETTINGS icon on the main parked
screen (or any of the drive screens) to
display the settings screens.
Press the right arrow icon to navigate to the
second settings screen.
To uc h Security PIN.
You will be asked to enter the old PIN code.
Enter the old PIN code (if you haven’t
previously set a PIN code, the default code is
1234) by touching the numbers on the screen
and then touch OK. If you enter an incorrect
PIN code, an invalid entry message will be
displayed. Either enter the correct PIN code
or touch the EXIT icon to return to the
previous screen.
You will be then be asked to enter the new
PIN code. Enter a new PIN code and then
touch OK.
Note: The PIN code must be between four
and eight digits in length.
You will then be asked to confirm the new PIN
code. Enter the new PIN code again and then
touch OK.
If the PIN code does not match the previously
entered code a message will be displayed
telling you that the PINs differ and you will
need to enter the PIN code again.
If the PIN codes match, then the PIN Code Set
screen will be displayed.
Touch OK to return to the Settings screen.
Note: Always keep a record of your PIN code
and store it in a safe place. Do not store your
PIN code in your vehicle.
To Next Page
Loading...
