Switches and controls
6-7Driving your vehicle
Headlight high beam
Push the left-hand steering column lever
away from you to select high beam. To cancel
high beam, pull the lever towards you.
An indicator in the instrument panel
illuminates when high beam is active.
Note: The high beams operate only when the
exterior lights master switch is turned ON
and the key is in either the ACC or ON
position.
Headlight high beam flash
High beams can be flashed by briefly pulling
the steering column lever towards you and
releasing.
Exterior lights active period
The exterior lights will automatically
extinguish if the key is removed from the
starter switch. To keep the exterior lights on
after the key is removed, manually turn the
exterior light switch to the OFF position and
then back to the ON position.
Lights on warning
If the exterior lights have been left on, an
audible alert sounds when the driver’s door is
opened.
Day time running lights
If regions that require the vehicle’s lights to
be left on even during the day (for example,
Canada), the exterior lights will remain
turned on whenever the key is in the ON
position.
Turn signals
Move the left-hand steering column lever
down to operate the left turn signals or up to
operate the right turn signals. The turn
signals continue to operate until cancelled by
the steering wheel or by returning the lever to
its central position.
Indicators in the instrument panel
illuminate green and flash to show
which turn signals are operating. An audible
ticking is also heard.
Note: The turn signals operate only when the
key is in the ON position.
To Next Page
Loading...
