Tesla Roadster 2 - Trunk Light; License Plate Light

Bulb replacement
9-10 Roadside emergencies
Trunk light
To re m ove t h e b u l b :
1. Using the screwdriver supplied in the
toolkit, remove the two screws securing
the light unit to the inside of the trunk.
2. Withdraw the light unit from the trunk
and disconnect the two connectors.
3. Remove the lens from the light.
4. Spring the bulb holder clips apart to
release the bulb.
To install the new bulb, reverse the above
steps.
License plate light
To r e m ove th e b u lb :
1. Using the screwdriver supplied in the
toolkit, remove the two screws securing
the light unit to the rear bumper.
2. Withdraw the light unit from the bumper
and disconnect the two connectors.
3. Remove the lens from the light.
4. Spring the bulb holder clips apart to
release the bulb.
To install the new bulb, reverse the above
steps.
TR0171
TR0172