EasyManua.ls Logo

Tesla Roadster 2 - Interior Temperature Control

Tesla Roadster 2
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Interior temperature control
7-4 Comfort and convenience
Interior temperature control
General information
The temperature of the air inside the vehicle
is controlled using the controls on the
dashboard.
Heating is provided by a high voltage electric
heater and cooling is provided by an
all-electric air conditioning system. Both of
these systems are located under the hood. In
addition to cooling the cabin, the air
conditioning system also cools the Battery.
Control panel
1. Te mp er at ure
2. Fan
3. Air distribution
4. Air conditioning
5. Air recirculation
Operating the system
Note: The fan, heating and air conditioning
system are powered by the Battery.
Prolonged use decreases the range of the
vehicle.
Temp e ra ture
Rotate the temperature control clockwise
(warmer) or counterclockwise (cooler) to
adjust the temperature of the air. The
temperature of the air entering the vehicle
changes only if the fan is operating.
Fan
Rotate the fan control clockwise to increase
fan speed. With the fan switched off, the
amount of air entering the vehicle depends
on your driving speed. To heat the vehicle ,
you must turn the fan on. To cool the vehicle,
you must press the air conditioning button
and turn the fan on.
TR1348
1 23
4 5
8
Air distribution
Rotate the air distribution control to change
the location in which air enters the interior of
the vehicle.
Windshield vents
Footwell vents
Face vents
To allow air to flow from more than one vent
location, position the control between two
locations.
Air conditioning
To cool the air inside the vehicle, turn the fan
on, then press the air conditioning button. The
button illuminates blue to indicate the system
is operating. Rotate the temperature control
to achieve the desired air temperature. To turn
off, press the air conditioning button again.
Air recirculation
Press the air recirculation button to recirculate
the air inside the vehicle. The button will
illuminate amber to indicate that air is being
recirculated. Press again to switch off.
When air recirculation is operating, and the
soft-top or hard-top is installed, 90% of the air
inside the vehicle is recirculated, instead of
being drawn from outside the vehicle. You can
use this to prevent fumes from entering the
vehicle or to effectively maintain a constant
interior temperature.

Table of Contents

Related product manuals