EasyManua.ls Logo

TESTING DT-202 - User Manual

TESTING DT-202
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DT-202_007
Operation Manual
for Drop Tester
Model DT-202
SHINYEI TESTING MACHINERY CO.,LTD.
Question and Answer IconNeed help?

Do you have a question about the TESTING DT-202 and is the answer not in the manual?

Summary

Cautions on safety

Indications of tester

Explains safety symbols and their meanings, warning of potential hazards.

Warnings and cautions

Cautions on operation

User support

Periodical calibration

Recommends annual calibration for instrument performance confirmation.

Reference or Contact

Lists contact information for SHINYEI TESTING MACHINERY CO., LTD. offices.

Home Pages

Provides the company's home page URL for product information.

Other

Offers assistance for questions related to shock testing methods and standards.

Summary of equipment

Specimen supporting base

Describes the base used to support and release a specimen.

Fixing and drop operation of specimen

Explains how to set and release a specimen using control unit switches.

Drop height setting

Details how to adjust the drop height using a scale and pointer.

Safety measures of operation

Outlines safety features and procedures related to drop operation.

Outer View

Preparation

Preparation to be executed first after installation

Covers initial setup steps including power supply and pneumatic source.

Preparation for test

Structure of components

Base

Details the base structure, its mounting, and floor anchoring.

Main column

Explains the main vertical column and its height setting scale.

Drop releasing device

Describes the device responsible for releasing the specimen via an electromagnetic holder.

Specimen supporting base

Explains the base that holds the specimen using pneumatic cylinders.

Height setting pointer

Locates the height setting pointer on the drop releasing device.

Pneumatic pen cylinders

Details the function and operation of pneumatic cylinders for specimen handling.

Contacts

Describes accessory contacts for specimen gripping and offers custom solutions.

Pneumatic regulator

Operation method

Control unit

Describes the function of each push-button and switch on the control unit panel.

[500 mm] selector switch

[TOTAL] (total counter)

[TRG] (Trigger terminal for high-speed camera photography)

Troubleshooting

[POWER] indicator lamp does not light

Lists checks for when the power indicator lamp is off.

[POWER] indicator lamp lights, but the specimen does not drop

Offers steps to resolve issues when the specimen fails to drop.

Pneumatic pen cylinders dont operate

Provides troubleshooting steps for non-operational pneumatic pen cylinders.

Daily check

Guide rail lubrication and cleaning

Lubrication instructions for guide rails and cleaning after use.

Periodic component checks

Periodic component checks, especially pneumatic cylinder operation, every 500 tests.

Performance and specifications

Type

Identifies the type of equipment as a Drop tester.

Model

Specifies the model number of the drop tester as DT-202.

Specified performance

Details key performance parameters like specimen size, weight, and drop height range.

Attachments

Diagram

Wiring diagram

Provides the electrical wiring schematic for the control unit and tester.

Parts list in wiring diagram

Pneumatic piping diagram

TESTING DT-202 Specifications

General IconGeneral
BrandTESTING
ModelDT-202
CategoryTest Equipment
LanguageEnglish

Related product manuals