TESTO 327 Quick Start Guide

Quick Start Guide
Model 327
Follow these basic steps outlined in this Quick Start Guide
to get you up and running with your new meter quickly and easily
Before using completely charge the battery
(for how long)
- attach power supply to analyzer
plug the power cord into wall socket
P Test screen displayed
(all segments are lit : 3s)
P Initial screen displayed
(Serial number, firmware version,
instrument model number, date, time
and country code : 5s)
F Orange hot keys can be used to:
- change fuel (Fuel)
- enter flue gas measuring mode
(Flue g)
- enter diagnostics mode
(Diagnost)
P Measuring Mode Displayed (fig. 2)
Change measurement mode (press )
(See Fig xx Measuring Mode menu
items)
F Orange hot keys can be used to
- change fuel (Fuel) (some modes)
- select measuring mode (OK)
Measuring
Flue gas
Fuel OK
Serial Number
Firmware Version
Sec.
Zero
°F
Tamb
MM/DD
YYY
Date
T I : M E
(EXAMPLE: Flue Gas Measuring Mode)
Note: Items in display are user
configurable and may not match this example
F Press OK hot key to enter mode
(Note: press esc to exit mode)
CAUTION:
30 SEC. COUNTDOWN IS A NULL
CALIBRATION. ENTER THIS MODE IN
CLEAN AIR ONLY
fig 3
7 5 . 7
29
F Change fuel (press / )
F Orange hot keys can be used to:
- change fuel (Fuel)
- change date and time (Date)
Reminder: verify date and time
fig 2.
P Initial flue gas measuring
mode screen displayed (fig. 4)
Note: This display will only appear if a Null
Calibration has NOT been performed.
Reentering Flue Gas mode after Null Calibration
will bypass this display.
Reminder: Dashes (----) appear when that
data field is empty
- Data has not been saved
- Calculation is out of limits
- Probe/sensor has not been
installed
Flue gas
Nat gas
°F
Tstack
%
CO2
%
EFF
%
ExAir
0.0
7 5 . 7
_________
_________
fig 4
F Change fuel (press / )
F Orange hot keys can be used to:
- enter measuring mode (OK)
P Flue Gas Measuring Mode Screen
Displayed (fig. 5)
Flue gas
Nat gas
°F
Tstack
%
CO2
%
EFF
%
ExAir
8 0 3 . 0
7 5 . 7
_________
_________
F Scroll though line items
(press / )
F Orange hot keys can be used to:
- change fuel (Fuel)
- Start measuring flue gasses
(Start)
Reminder:
Probe must be inserted into
stack to take stack measurements
fig 5.
P Flue Gas Null Calibration Screen
Displayed (fig. 3)
Step 1 - Charge battery.
Step 2-
Attach Probe
to Instrument
see fig 1.
fig 1.
Step 3- Turn Instrument ON
Step 4 - Select Measuring Mode
see fig 5.
Fuel
OK
Fuel Start
j
k
l
m
n
o
p
Product
Description:
j- IR interface,
ON/OFF switch
k- Display
l- Control keys
m- Power supply,
probe connec
tions, gas
outlet
n - condensate
trap
o- battery, cells
compartment
p- magnetic back

TESTO 327 Specifications

General

Brand	TESTO
Model	327
Category	Measuring Instruments
Language	English