TESTO 435 - Battery Type; Auto OFF; Reset

Battery type
To ensure that the battery capacity is displayed correctly, the battery type used
must be set.

Setting the battery type:
 The configuration menu is open, config. is displayed.
1 Device Bat-type  .
2 Press / Battery or ReBa and confirm with .
Auto OFF
If Auto OFF is switched on, the instrument switches itself off automatically after
10min if no button is pressed. Exception: Cyclical printing (instruments without
a memory) or a measuring program (instruments with a memory) is active.

Switching Auto OFF on/off:
 The configuration menu is open, config. is displayed.
1 Device Auto OFF  .
2 Press / to select On or Off and confirm with .
Reset
When a reset is carried out, the instrument is reset to the default settings, all
settings/ data are deleted. Exception: Language, Date/Time.

Resetting:
 The configuration menu is open, config. is displayed.
1 Device reset  .
2 Reset with or cancel the reset with .
Setting min. / max. printing function
If pr MinMaxAuto is activated, minimum and maximum values are also printed
with the measurement readings.

Switching off pr MinMax:
 The configuration menu is open, Config. is displayed.
1 Device pr MinMax  .
2 Choose On or Off with / and confirm with .
OK
OKOK
ESCOK
OKOK
OK
OKOK
OK
OKOK
6. Setting the instrument14