TESTO 435 - Memory Management


Opening the main menu:
 The instrument is in measurement view.
 Press .
- Menu is displayed.
Press to go one menu level back. To leave the main menu, press
several times until the instrument changes to measurement view.
6.2.1 Memory (435-2/-4 only)
Info
The free memory space is displayed
Location
The active location can be changed. Up to 99 locations can be created. The
numerical location designations (01-99) can be changed into any text (max.
10 characters) using the PC software.

Changing an active location:
 The main menu is open, Menu is displayed.
1 Memory Location  .
2 Press / to select the location to be activated and confirm with
.
Protocol
Saved measurement protocols can be printed out on a Testo printer (accessory
part) via the infrared interface.

Printing a measurement protocol:
 The main menu is open, Menu is displayed.
1 Memory Protocol  .
2 Press / to select the measurement protocol that is to be printed.
3 Press to start printing out the measurement protocol.
Delete
The entire memory with all measurement protocols can be cleared.
OKOK
OK
OKOK
ESC
ESC
6. Setting the instrument20