TESTO 435 - Measuring Programs


Clearing the memory:
 The main menu is open, Menu is displayed.
1 Memory Delete  .
2 Press to clear the entire memory.
6.2.2 Measuring program (435-2/-4 only)
A measuring program can be programmed and activated/deactivated:
Designation Description
Off Measuring program switched off: Readings can be stored manually
AUTO Automatic measuring program: The measuring cycle (min. 1s) and the number of
readings can be set freely.
Turb Automatic measuring program for measuring turbulence (only if a turbulence probe
is available and plugged in): The measuring cycle (1/5s) and duration (180s) are
preset.

Deactivating a measuring program:
 The main menu is open, Menu is displayed.
1 Meas.Prog  .
2 Press / to select Off and confirm with .
- The instrument returns to measurement view.

Programming and activating the AUTO measuring program:
 The main menu is open, Menu is displayed.
1 Meas.Prog  .
2 Press / to select AUTO and confirm with .
The measuring cycle is set in the order: hours /minutes/ seconds.
3 Press / to set the measuring cycle in hours and confirm with
.
4 Perform the setting for minutes and seconds as described in step 3.
5 Press / to set the number of readings and confirm with .
- The instrument returns to measurement view.
OK
OK
OK
OK
OK
OK
OK
OKOK
6. Setting the instrument 21
deenfresitptsvnl????