6. Setting the instrument18
Pressure
The function is only available when an absolute pressure probe is attached.
You can set whether the absolute air pressure (measured with an absolute
pressure probe) or the barometric air pressure (calculated from the measured
absolute pressure and the input of the altitude above sea level).
For the input of abs alt. for the calculation of the barometric air pressure, see
chapter PARAMETER /AREA, p. 24.
Setting measurement parameter:
The configuration menu is open, config. is displayed.
1 Probe Pres. .
2 With / , select the desired measurement parameter and confirm
with .
6.1.5 Language
Setting
the
language:
The configuration menu is open, config. is displayed.
1 Language .
2 Select the desired language with / and confirm with .
6.2 Main menu
Settings by which the measuring instrument can be adapted to the particular
measuring task are performed in the main menu.
The instrument has predefined measurement profiles that are tailored to
specific areas of application.
See the chapter PROFILE, p. 12.
The profile setting influences the number of available functions and the
structure of the main menu.
The method described in this chapter for calling up the functions in the main
menu relates to the Standard profile setting. If a different profile is set, the
method for calling up individual functions may change or the function may
not be available in that particular profile. Some functions are only available
when a probe is connected or a wireless probe is switched on and
registered.
OK
OK
OK
OKOK
To Next Page
Loading...
