TESTO 435 - Units; Device Settings

6.1.2 Units
Predefined systems and individual setting options:
Parameter ISO system US system Individual setting options
Temperature °C °F °C, °F
Pressure hPa inchH2O mbar, Pa, hPa, kPa, inchH2O
Velocity m/s fpm m/s, fpm
Volumetric flow rate m³/h ft³/min m³/h, l/s, ft³/min
Length mm inch mm, inch
Power kW BTU/h kW, BTU/h, TONS

Setting units:
 The configuration menu is open, config. is displayed.
1 Units  .
2 Press / ISO/US (to set the system) or a parameter (to set
individually) and confirm with .
3 Set the system of units or the desired unit with / and confirm
with .
6.1.3 Device
Instrument data

Displaying instrument data:
 The configuration menu is open, config. is displayed.
1 Device Inst.data  .
- The firmware version and the serial number of the instrument are
displayed.
Date/ Time

Setting the date/time:
 The configuration menu is open, config. is displayed.
1 Device date/time  .
2 Use / to set the value for year and confirm with .
3 Set the other values as described in step 2.
OK
OKOK
OKOK
OK
OK
OK
6. Setting the instrument 13
deenfresitptsvnl????