TESTO 435 - Mean Calculation Methods; Running Measuring Programs; Cyclical Printing


Timed mean calculation:
The mean is formed as a moving mean value and individual values are not
displayed.
1 435-1/-3: Press , 435-2/-4:  Mean  .
2 Timed  .
3 Press to start mean calculation.
Press to stop mean calculation.

Multi-ppoint mean calculation:
The mean is formed as a moving mean value.
1 435-1/-3: Press , 435-2/-4:  Mean  .
2 Multi-poi  .
3 Press to include readings.
Press to stop mean calculation.
Only testo 435-2/ -4 in the profile Duct measurement and with hole query
activated (see chapter
DEVICE, p. 13):
4 With / , enter number of holes and confirm with .

Running the AUTO or TURB measuring program (435-22/-44 only):
 The instrument is in measurement view and the AUTO or TURB measuring
program is activated.
1 Start the measuring program with .
- The measuring program starts. The readings are recorded.
- The measuring program continues to run until cancelled with or
until the end criterion is met (number of readings is reached or time has
expired when measuring turbulence ).
- The readings are saved in a protocol.

Cyclical printing (435-11/-33 only):
 The instrument is in measurement view and Cyclical Print is activated.
 Start cyclical printing with .
- The measuring program starts. The readings are transmitted to the
Testo printer.
- Measurement continues to run until cancelled with or until the
end criterion is met (number of readings is reached).
End
End
Start
OK
End
Pick
OK
OKMEAN
End
Start
OK
OKMEAN
7. Measuring28