TESTO 650 - Page 33

33
Store programming with the left function button.
The programmed memory function cannot be activated without “Save”.
Save: activates the input programming, the left function button is automatically allocated with
“Start”, if necessary.
Erase: programming is erased.
When storing programs are activated you will be informed via the display (in the top
left function field) about the progress in storing.
1. Program is active and is waiting for the starting criterium to be fulfilled:
Low limit: Ð
High limit: Ï
Manual:
Time start:

2. The program is running and is storing values.
appears along with a symbol from item 1.
When this symbol disappears, the program has finished and can be started again if
necessary. PRINT - I
NSTRUMENT DATA and PRINT - CONFIGURATIONS produce a printout which
can be used for checking purposes.
Automatic storing
PROGRAMME - END - Memory Full
stops the program if the complete memory is full.
Wrap Around
Stores until storing has been interrupted by the the “Stop” function
button (appears automatically in the function bar once the program
has started). If the memory is full, the values stored at the start are
overwritten. Therefore you always have the last possible values in
the memory.
No. of Values
ends the program if the specified number of values in the memory
has been reached.
Date/Time is only available with programmed starting criterium,
date/time.