TESTO 871 - Using the Testo Thermography App; Establishing WLAN Connection; Selecting Display Modes via App

5 WLAN connection - using the App
20
5.2 Using the App
5.2.1 Establishing a connection

- WLAN is activated in the thermal imager.
1 - Smartphone/tablet -> Settings -> WLAN settings -> camera is
shown with serial number and can be selected.
2 - Press Connect.

The WLAN connection to the thermal imager is established.
5.2.2 Select display
Second display

- The thermal imager is connected via WLAN.
1 - Selection -> 2nd display

The display on the thermal imager is shown on your mobile end
device.
Remote

- The thermal imager is connected via WLAN.
1 - Selection -> Remote

The display on the thermal imager is shown on your mobile end
device. The thermal imager can be controlled and settings made via
the mobile terminal device.