7 Performing the measurement
35
7.6 Selecting the colour palette
This function is only available if the Image type is set to infrared image.
1 - Select the Palette function.
2 - Move the joystick up/down to select the required colour palette and
then press OK.
7.7 Image type
The display can be switched between infrared image and real image (digital
camera).
1 - Select the Image type function.
2 - Move the joystick up or down and choose between infrared image or
real image view.
3 - Press OK to confirm the selection.
7.8 Activating humidity, solar or electrical
mode
1 - Open Menu.
2 - Move the joystick down and select Measurement. Then press
OK or move the joystick to the right.
3 - Move the joystick down and select External measurement values.
Then press OK.
4 - Move the joystick up/down and activate Humidity, Current, Voltage,
Solar or Power.
- If no radio probe is connected, enter the values manually.
- If a radio probe is connected, values are transferred automatically.
5 - Press OK to activate the selected Mode.
To Next Page
Loading...
