TESTO 871 - Instrument Configuration Options; General Configuration Settings

7 Performing the measurement
37
4.4 - Point-RTC selection:
o Move the joystick to the right -> select measuring point 1 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o Move the joystick to the right, set the value manually.
o End measurement: move the joystick to the right, press End.
7.10 Configuration
7.10.1 Settings
Country settings
The user interface language can be set.
1 - Select the Country settings function.
2 - Move the joystick up/down to select the required language and
then press OK.
Set time/date
Time and date can be set. The time and date format are set automatically
based on the selected user interface language.
1 - Select the Set time/date function.
2 - Move the joystick to the right/left to select the required setting
option.
3 - Move the joystick up/down to set the value.
4 - After setting all values, press OK.
Temperature unit
The temperature unit can be set.
1 - Open the Temperature unit submenu. For how to proceed: see
Getting to know the menu.
2 - Move the joystick up/down to select the required unit and then
press OK.