6 Using the product
31
Country settings…
Instrument language and temperature unit can be set.
1. [OK] | Configuration… | [OK].| Country settings… | [OK].
- The Country settings dialogue is opened.
2. Move Joystick up/down to select the desired option.
- The selected option has an orange border ( ).
3. Confirm the selection with [OK].
- The selected setting is highlighted orange (
).
4. Move Joystick up/down to change the setting.
5. Confirm the entry with [OK].
6. Confirm the settings with Apply.
Optics...
The lenses adjusted to the instrument are shown. Only the
lenses that are shown may be used.
> [OK] | Configuration… | [OK] | Optics… | [OK].
Using the Protection glass option, you can set whether an
infrared protection glass is used or not. Ensure the correct
setting to prevent corruption of the measurement results.
> Press [OK] to activate (
) or deactivate ( ) the
Protection glass option.
- When the option is activated, the protection glass symbol
( ) appears in the lower right-hand corner of the display.
Power-save options…
Options can be set to extend the rechargeable battery running
time.
1. [OK] | Configuration… | [OK] | Power-save options… |
[OK].
- The Power-save options dialogue is opened.
2. Move Joystick up/down to select the desired option.
- The selected option has an orange border (
).
3. Confirm the selection with [OK].
- LCD backlight: The selected setting is highlighted orange
and can be changed (
).
To Next Page
Loading...
