8 Tips and assistance
38
8 Tips and assistance
8.1. Questions and answers
Question Possible causes/solution
Message Backup battery
empty or not present is
shown.
1. Confirm the message with
[OK].
2. Change buffer battery, see
Change buffer battery page 36.
Error No memory card
inserted! is shown.
Memory card defective or not
inserted.
1. Confirm the message with
[OK].
2. Check or insert memory card.
Error Memory card full! is
shown.
Insufficient memory present.
1. Confirm the message with
[OK].
2. Insert new memory card.
Error No lens/wrong lens!
is shown.
1. Switch off thermal imager.
2. Check lens
> Change lens if necessary.
Message Charging not
possible! is shown.
Ambient temperature is outside
the permissible range for charging
the battery.
1. Confirm the message with
[OK].
2. Keep to the permissible
ambient temperature.
Error Permissible
instrument temperature
exceeded! is shown.
1. Switch off thermal imager.
2. Let instrument cool off and
keep to the permissible
ambient temperature.
--- or +++ is shown instead
of the reading.
Reading is outside of the
measuring range.
> Change measuring range.
To Next Page
Loading...
