TESTO 880 - Palette; Configuration

6 Using the product
30
- The selected option has an orange border ( ).
4. Confirm the selection with [OK].
- The selected number is highlighted orange (
).
5. Move Joystick up/down to set the desired value. Move
Joystick right/left to change between the numbers.
6. Confirm the entry with [OK].
7. Confirm the settings with Apply.
- Settings are applied.
- The selected emissivity (
) is shown at the bottom right in
the display in measurement view.
6.1.6. Palette
Change colour palette for the infrared image
You can choose between 8 existing palettes. The currently
activated option is marked with a tick ( ).
1. [OK] | Palette| [OK].
2. Move Joystick up/down to select the desired option.
3. Confirm the selection with [OK].
6.1.7. Configuration
Time/date...
Time and date can be set. Time and date format are
automatically set based on the selected instrument language.
1. [OK] | Configuration… | [OK] | Time/date… | [OK].
- The Set time/date dialogue is opened.
2. Move Joystick up/down to select the desired option.
- The selected option has an orange border (
).
3. Confirm the selection with [OK].
- The selected number is highlighted orange (
).
4. Move Joystick up/down to set the value. Move Joystick
right/left to change between the numbers.
5. Confirm the entry with [OK].
6. Confirm the settings with Apply.