6 Using the product
52
Task Actions/description
(automatic start following lower temperature
deviation within the range selection).
• Interval:
Time (time between the taking of two images),
Manual (when the shutter button is pressed).
• End:
Number of images.
1. Touch parameter.
- The input screen opens.
2. Select criterion / adjust values.
3. .
Enable /
disable shutter
In the case of stable environmental conditions and
set-ups that do not heat up the sensor / camera,
the automatic shutter function can be disabled.
This can prevent individual images of the
sequence being recorded with a time delay
(outside the programmed capturing interval).
Deviations in accuracy and image quality when the
shutter is disabled are negligible in a period of up
to 60 minutes.
>
.
- Icon is highlighted orange: shutter is enabled.
- Icon is not highlighted orange: shutter is
disabled.
Select where
to save image
> .
- The Folder input screen opens.
To Next Page
Loading...
