TESTO 925 - Performing Measurements; Basic Measurement Procedure

7 Using the product
15
7.2.3
Carrying out multi-point mean calculation
1
Press MODE/END.

flashes.

The number of readings recorded is displayed in the upper line, while
the current reading is displayed in the lower line.
2
To record readings (in the desired quantity):
Press MENU/ENTER (several times).
3
To end measurement and calculate the mean value:
Press MODE/END.

and flash.
The number of measured values and the calculated multi-point mean
value are displayed.
4
To switch back to the measuring view:
Press MODE/END.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com