TESTO 925 - Carrying out Continuous Mean Calculation

7 Using the product
16
7.2.4
Carrying out continuous mean calculation
1
Press MODE/END twice.

flashes.

The elapsed measuring time (mm:ss) is displayed in the upper line,
while the current reading is displayed in the lower line.
2
Start measurement:
Press MENU/ENTER.
3
To interrupt/continue measurement:
Press MENU/ENTER each time.
4
To end measurement and calculate the mean value:
Press MODE/END.

and flash.
The measurement period and the calculated continuous mean value
are displayed.
5
To switch back to the measuring view:
Press MODE/END.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com