6 Using the product
122
Designation Explanation
Serial number
Serial number of the Saveris base.
Firmware Version number of the instrument
software in the Saveris base.
Date and time
Date and time of the Saveris base.
Pos: 158 /TD/Produ kt verwenden/testo Sa veris/09 Einstellu ngen System/03 Betriebs daten @ 1\mod_119753699 4375_79.docx @ 6253 @ 3 @ 1
6.9.2. Show operating data of the probes.
Using this menu item, you can check when the last data were
received from a probe, for example, and the duration until the next
readings can be expected.
1. Open the Base entry.
- The submenu items General and Operating data are shown
under the entry.
2. Click on Operating data to look at the connection data.
- The connection data are listed in the display range according to
probe.
To Next Page
Loading...
Need help?
General
