TESTO Saveris T4E Ethernet probe User Manual

5 First steps
75
17. Enter Measuring cycle and define its Unit.
The measuring cycle determines the intervals at which
a new measured value is saved in the Saveris base.
Possible settings for the unit:
• sec (second)
• min (minute)
• h (hour).
18. Click on [Next >].
- If a router is registered on the Saveris base, the configuration of
the connection type for the probes is shown.
If you have not registered a router, continue with step 24.

TESTO Saveris T4E Ethernet probe Specifications

General

Brand	TESTO
Model	Saveris T4E Ethernet probe
Category	Measuring Instruments
Language	English