TestPad BTS-2002H - Mobile Phone Model ID Mapping

Shenzhen TestPad Electronic Co., Ltd. http://www.test-pad.com
19
m)
TEST
Fail:
R2
HIGH
Test
failure:
The
impedance
of
identification
resistor
2
is
high.
n) TEST Fail: ID ERROR Test failure: The communication ID does not pass the test.
o)
TEST
Fail:
SHORT
ERR
Test
failure:
The
short-circuit
protection
function
is
abnormal.
4. List of mobile phone models corresponding to commonly used IDs:
a)
x2935
is
frequently
used
in
these
MOTO
mobile
phones:
V998,
V8088,
C300,
328,
366,
CD928, T191, T189, L2000, and V2088
b)
x2936
is
frequently
used
in
these
MOTO
mobile
phones:
V60,
V66,
V300,
V303,
V500,
V600, E360, T720, A760, A768, A860, E398, E680, V80, V3, and I90.
c)
x2937
is
usually
in
these
MOTO
mobile
phones:
CDMA
V680,
V730,
V688,
V2680,
and C510
d)
Other
IDs
may
correspond
to
some
old
mobile
phone
models,
most
of
which
are
no
longer produced. If it is unable to identity the mobile phone model of an ID, select any
model for the test. If the model does not pass the test, select another model. If all the
models do not pass the test, it is recommended to read the ID in this way: Connect the
ID, and then select “Read DS2502” from the main menu of the tester to read the ID.
Then the data will be saved in the internal memory. Select “Read” in the “ID type” box,
then the new ID can be tested.