Shenzhen TestPad Electronic Co., Ltd. http://www.test-pad.com
28
Enter Calibration
The measurement accuracy of this tester may change with the time or temperature. If so, you can
calibrate the measurement accuracy of the tester through the operating keypad and the display
interface; it is not necessary to remove the shell of the tester. In this mode, you can calibrate the
measurement of voltage, impedance, charge current, discharge current, and over-current protection
current and save the settings.
You are required to enter your password before accessing the calibration function, avoiding
unauthorized calibration. See the figure below.
For the detailed calibration operations, see Calibration Instructions for Integrated Battery Tester
or consult the supplier or agent.
Please Enter Password
for Calibration
[******_ ]
To Next Page
Loading...