Tesup ATLAS2.0 - Regular Operation; Switching On the Wind Turbine System; Restart After Emergency

ATLAS 2.0 (MADE IN EUROPE)
~ 23 ~
TESUP
8.1 SWITCHING ON THE WIND TURBINE SYSTEM:
▪ Unlock the emergency stop button or release the brake button on the TESUP
charge controller.
▪ The brake is released.
▪ The fast-blinking red LED on the TESUP charge controller goes out.
▪ The wind turbine system supplies power.
8.2 RESTART AFTER EMERGENCY:
▪ Make sure the risk has been removed.
▪ Switch on the wind turbine system (section 8.1)
8. REGULAR OPERATION
NOTE: For information on operating the charge controller, refer to the separate
instructions.