Teuco Seaside - Preliminary Operations; Control Panel and Display Details

Blinking LED: Indicates reception of signals from
Remote Control (see Remote Control)
6
SEASIDE
EN
DETAILS OF CONTROL PANEL AND DISPLAY
QUICK START
ON/OFF button
Display
Shows messages
LED
Infrared receiver
ALARM
ON/OFF button
FILLING THE TUB
Fill the tub until the water covers is at least 10 cm above the suction valve.
POWERING-UP THE SYSTEM
Position the isolating switch (fitted during installation) to “ON”.
The display goes into STAND-BY mode, showing the exact
time.
Display in STAND-BY mode
2 0 : 3 0
PRELIMINARY OPERATIONS