17 • Cinebase
Care and Cleaning
• Ideally, you should remove dust or small amounts of
dirt with a dry, smooth leather cloth.
• Use a damp cloth to rub off stubborn dirt. Make
sure that no liquid penetrates the housing.
• Then immediately wipe the damp surfaces off with
a soft cloth without applying pressure.
Note
Risk of damage!
Using the wrong cleaning agents may damage the
delicate surface of the housing.
• If possible, only use plain water without any
additives. In case of stubborn marks, a mild soap
solution may be used.
• In no circumstances should caustic cleaning
products, white spirit, thinners, petrol or similar
be used for cleaning.
To Next Page
Loading...
