What to do if my Teufel Stereo System Cinebase doesn't emit sound?
If your Teufel Cinebase stereo system isn't producing any sound, there are a few potential reasons. First, ensure that you have selected the correct source. Also, check if the device is muted and unmute it by pushing the button or adjusting the volume. Finally, verify that the volume isn't set to “0” and increase it if necessary.
General| Audio decoders | Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II, DTS |
|---|---|
| RMS rated power | 100 W |
| Audio output channels | 2.0 channels |
| Audio Return Channel (ARC) | Yes |
| Woofer diameter | 130 mm |
| Number of woofer drivers | 2 |
| Soundbar speaker RMS power | 20 W |
| Subwoofer included | No |
| Receiver included | - |
| Product color | Black |
| Frequency range | 42 - 20000 Hz |
| Docking connector type | Not supported |
| Soundbar dimensions (WxDxH) | 730 x 410 x 110 mm |
| Number of amplifier channels | 7 channels |
| HDMI in | 1 |
| Bluetooth version | 4.0 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 230 V |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 320 W |
Weight and Dimensions| Soundbar weight | 11700 g |
|---|
To Next Page
