EasyManua.ls Logo

Teufel cinebase - Listening Volume and Setup Safety; Environmental and Fire Safety

Teufel cinebase
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 • Cinebase
Extended listening at high volumes may
lead to hearing loss.
To avoid damage to health, avoid extended listening
at high volumes.
When the volume is set high, always keep a certain
distance from the device and never place your ear
directly on the speaker.
If a speaker is set to full volume, this may produce
very high sound pressure. This may have psycholog-
ical consequences and also cause physical injury.
Children and pets are particularly at risk. Set your
signal source device volume control to a low setting
before turning on the power.
CAUTION
An unsuitable setup location could lead to
damage.
If the Cinebase is not securely mounted, do not
use it in vehicles, in unstable locations, on wobbly
tripods or furniture, on underdimensioned brackets
etc. The Cinebase or the TV-set on it may tip or fall
over and cause injury to persons or be damaged
themselves.
Only place the Cinebase on a solid base with suffi-
cient carrying capacity.
Set the Cinebase up so that it cannot be knocked
over inadvertently and make sure that the cables
do not pose a trip hazard.
Carefully follow the instruction manual.
When storing the Cinebase, make sure that it is in a
stable position and that there is no risk of it falling
or being pulled down.
NOTE
External influences may damage or destroy the
device.
If the device is to be left unsupervised for a long
period (e.g. during a holiday), or if a thunderstorm
is forecast, disconnect the mains plug from the
socket. Otherwise, sudden overvoltage could cause
the device to become defective.
In the event of prolonged absence, remove the
batteries from the remote control. Leaked batteries
may damage the remote control.
If the device is subjected to warm temperatures
after being cold (e.g. after transport), condensation
may occur inside of it. In this case, wait at least 2
hours before you connect and activate it.
Improper use may lead to damage or fire.
Do not place open flames such as burning candles
or similar on the device.
Ensure sufficient ventilation.
Do not place the device in direct sunlight.

Related product manuals