Texas Instruments BA II Plus - Page 119

7: Other Worksheets 113
Procedure: Using the Memory Worksheet
쐃
Press
& {
to select the worksheet.
M0
is displayed, along with any value you may have stored in
this memory.
쐇
Perform any of the following operations.
<
To clear all 10 memories at once, press
& z
.
<
To view the contents of the memories, press
#
or
"
.
<
To store a value in a memory, key in the value when the
memory you want is displayed (
M0
through
M9
) , and then
press
!
.
<
To perform memory arithmetic without being in the
Memory worksheet, refer to “Memory Operations” in
Chapter 1.
Procedure: Clearing a Memory
To store a zero in memory 4 (in effect, clearing the memory):
쐃
Press
#
or
"
until
M4
is displayed.
쐇
Press
0
!
.
Procedure: Storing a Value to a Memory
To store 95 in memory 3:
쐃
Press
#
or
"
until
M3
is displayed.
쐇
Press
95
!
.
Procedure: Adding a Value to a Memory
To add 95 to the value in memory 9:
쐃
Press
#
or
"
until
M9
is displayed.
쐇
Press
H
95
!
.
Procedure: Subtracting a Value from a Memory
To subtract 95 from the value in memory 5:
쐃
Press
#
or
"
until
M5
is displayed.
쐇
Press
B
95
!
.