Projects
www.ti.com
14
SWRU271H–October 2010–Revised April 2019
Submit Documentation Feedback
Copyright © 2010–2019, Texas Instruments Incorporated
The TI Bluetooth Low Energy Software Development Platform
2.3 Projects
The SimpleBLEPeripheral project consists of sample code that demonstrates a simple application in the
single-device configuration. You can use this project as a reference for developing a slave/peripheral
application.
The SimpleBLECentral project is similar because it demonstrates a simple master/central application in
the single-device configuration, and can be a reference for developing master/central applications.
The HostTestRelease project is used to build the Bluetooth Low Energy network processor software for
the CC2540/41. This project contains configurations for both master and slave roles.
The Bluetooth Low Energy development kit includes other sample projects. These projects implement
various profiles and demonstration applications. For more information on these other projects, see the TI
CC2540 Bluetooth low energy Sample Applications Guide.
2.4 Software Overview
Software developed using the Bluetooth Low Energy software development kit consists of following five
major components:
• OSAL
• HAL
• The Bluetooth Low Energy Protocol Stack
• Profiles
• Application
The kit provides the Bluetooth Low Energy protocol stack as object code and the OSAL and HAL
components in source form.
The kit provides three GAP profiles:
• Peripheral role
• Central role
• Peripheral bond manager
The kit also provides several sample GATT profiles and applications.
Path and file references in this document assume that you have installed the Bluetooth Low Energy
development kit software to the path: C:\Texas Instruments\BLE-CC254X-1.5.x.
NOTE: This document references the SimpleBLEPeripheral project. The Bluetooth Low Energy
projects in the development kit follow a similar structure.
To Next Page
Loading...
Need help?
General
