Field Service 6-23
1. Remove the Top Cover and Fan Assemblies as described in Paragraphs 6.5.10
and 6.5.11 respectively.
2. Separate the inside frame assembly from the base assembly as shown in
Figure 6-19.
3. Turn the unit over and remove the screw holding the Power Supply Board to
the inside of the Frame Assembly (Figure 6-20). Remove the Power Supply
Board.
4. To reinstall the Power Supply Board, reverse the removal procedure.
Figure 6-20 Removing/Replacing the Power Supply Board Assembly
6.5.17 Removing/Replacing the Motherboard Assembly
6.5.17.1 60x Series Motherboard Assembly
Use the following procedure to remove/replace the Motherboard Assembly in a 60x
Series Notebook:
1. Remove the Top Cover and Fan Assemblies as described in Paragraphs 6.5.10
To Next Page
Loading...
