Field Service 6-31
6. Lift up and remove the Touchpad buttons.
7. Lift up and remove the Touchpad.
8. Replacement is essentially the reverse of Steps 1 through 7.
Figure 6-28 Removing/Replacing the Touchpad Assembly
Caution: If the notebook is powered up with the LCD bezel removed, you
can be exposed to high voltages which could result in shock and equip-
ment damage. Ensure that the batteries and AC adapter are removed from
the notebook when working on the LCD/Display assembly.
6.5.22 Removing/Replacing the Display Bezel
To remove/replace the Display Bezel, use the following the procedure;
Remove 1 screw
and disconnect J1
Remove two side screws
and remove metal plate
Lift up and remove
touchpad buttons
Lift up and remove
Touchpad
To Next Page
Loading...
