User interface
2 buttons, 2 LEDs
40-pin LaunchPad
standard headers
Hardware
www.ti.com
6
SLAU678A–March 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
MSP430FR5994 LaunchPad™ Development Kit (MSP
‑
EXP430FR5994)
2.1 Block Diagram
Figure 3 shows the block diagram.
Figure 3. MSP-EXP430FR5994 Block Diagram
2.2 Hardware Features
2.2.1 MSP430FR5994 MCU
The MSP430FR5994 is the next device in TI's new ULP FRAM technology platform. FRAM is a cutting-
edge memory technology that combines the best features of flash and RAM into one nonvolatile memory.
For more information on FRAM, see www.ti.com/fram.
Device features include:
• 1.8-V to 3.6-V operation
• 16-bit RISC architecture up to 16-MHz system clock and 8-MHz FRAM access
• 256KB of FRAM and 8KB of SRAM
• 16-channel 12-bit ADC
• 16-channel analog comparator
• Six 16-bit timers with seven capture/compare registers each
• 6-channel direct memory access (DMA)
• 128-bit or 256-bit AES
• 32-bit hardware multiplier (MPY)
• 68 GPIOs
To Next Page