Texas Instruments LaunchPad MSP430G2553 User Manual

1
SLAU772A–June 2018–Revised March 2020
Submit Documentation Feedback
Copyright © 2018–2020, Texas Instruments Incorporated
MSP430G2553 LaunchPad™ Development Kit (MSP ‑ EXP430G2ET)
User's Guide
SLAU772A–June 2018–Revised March 2020
MSP430G2553 LaunchPad™ Development Kit
(MSP ‑‑ EXP430G2ET)
The MSP430G2553 LaunchPad™ Development Kit is an inexpensive and easy-to-use evaluation module
(EVM) for the MSP430G2xx entry-level series of microcontrollers (MCUs). It contains everything needed
to start developing on the ultra-low-power MSP430™ microcontroller platform, including an onboard debug
probe for programming, debugging and energy measurements. The board also features a push button and
three LEDs for creating a simple user interface.
Figure 1 shows the MSP-EXP430G2ET LaunchPad development kit.
Figure 1. MSP-EXP430G2ET LaunchPad Development Kit

Texas Instruments LaunchPad MSP430G2553 Specifications

General

Microcontroller	MSP430G2553
Architecture	16-bit RISC
Clock Speed	16 MHz
Flash Memory	16 KB
RAM	512 B
GPIO Pins	24
ADC	10-bit, 8 channels
Operating Voltage	1.8V to 3.6V
Communication Interfaces	UART, SPI, I2C
Package Type	TSSOP
Development Board	LaunchPad
USCI Modules	1 USCI_A, 1 USCI_B