Texas Instruments M-LVDS - M-LVDS EVM Bill of Materials

Bill of Materials
3-2
Bill of Materials, Board Layout, and PCB Construction
3.1 Bill of Materials
Table 3−1.M-LVDS EVM Bill of Materials
Item
No.
Qty.
Reference
Designation
Description MFG Part # Not Installed
1 2 C1, C2 Capacitor, SMT1206, 50 V, 10%,
0.01 µF
AVX 12101C103JATMA
2 4 C5, C6, C9,
C10
Capacitor, SMT1206, 16 V, 10%,
1 µF
AVX 1206YC105KAT
3 4 C3, C4, C7, C8 Capacitor, SMT1210, 10 V, 10%,
10 µF
AVX 1210ZG106ZAT2A
4 2 J11, J13, J15,
J17
Banana jack, red Allied ST−351A J11, J15
5 2 J12, J14, J16,
J18
Banana jack, black Allied ST−351B J12, J16
6 4 J1 − J 10 Connector Allied 713−4339 J3 − J6, J9, J10
7 4 TP1 − TP4 Header (make from 4−103239−0) AMP 4−103239−0x2
8 3 P1 − P3 Header (make from 4−103239−0) AMP 4−103239−0x2
9 4 W7 − W10 Header (make from 4−103239−0) AMP 4−103239−0x2
10 4 W1 − W4 Header (make from 4−103239−0) AMP 4−103239−0x3
11 1 U1 IC, SMT, 14P, High speed 50-Ω
line driver/receiver
TI
†
SN65MLVD202AD
SN65MLVD205AD
SN65MLVD203D
SN65MLVD207D
12 1 U2 IC, SMT, 8P High speed 50-Ω
line driver/receiver
TI
†
SN65MLVD200AD
SN65MLVD204AD
SN65MLVD201D
SN65MLVD206D
13 2 R1, R3, R12,
R14
Resistor, SMT, 1/4 W, 1%, 49.9 Ω Dale CRCW121049R9F R1, R12
14 2 R2, R13 Resistor, SMT, 1/4 W, 1%, 453 Ω Dale CRCW12104530F
15 6 R8 − R11, R17,
R18
Resistor, SMT, 1/4 W, 1%, 0.0 Ω Dale CRCW12100000F R8 − R11, R17,
R18
16 6 R4 − R7, R15,
R16
Resistor, SMT, 1/4 W, 1%, 100 Ω Dale CRCW12101000F
17 4 1/2” nylon, hex, standoff Keystone 1902C
18 4 Phillips, pan head, screw H703−ND
19 8 Jumper, shorting
†
Only one will be installed.