Texas Instruments MultiView TI-34 User Manual

Note: This is what a key looks like before and after you select it.
Before: After:
2. Select keys
3. Click Edit>Copy (to copy keys as graphics)
or
Click Edit>Copy As Font (to copy keys as the primary font character) 5 - 6.
4. Switch to another application.
5. Paste the keys at the appropriate location.
Note:
• You can also drag the selected keys as graphics to the other application.
• You can re-size the key graphics after you paste them into a new application.
• In some applications, the characters pasted as a font may be shown in the font
that is in effect at that location, so they may not look anything like scientific
calculator keys. If necessary, apply the TI34EmuKeys font to the characters. See the
help file for the destination application you are using for details on how to apply a
font to the characters.
Using the TI-SmartView™ Emulator Workspace for MathPrint™ Calculators 12

Texas Instruments MultiView TI-34 Specifications

General

Display Digits	16
Power Source	Battery
MathPrint	Yes
Matrix Calculations	No
Vector Calculations	No
Battery Type	Solar & Battery
Key Features	MultiView display