TI-TXT File Format
A-3
Hex Object Format
A.2 TI-TXT File Format
The TI-TXT file format used by the tool is shown as follows:
@ADDR1
DATA01 DATA02 ........ DATA16
DATA17 DATA32 ........ DATA32
........
DATAm ........DATAn
@ADDR2
DATA01 .................... DATAn
q
Whereas:
@ADDR is the start address of a section (hexadecimal)
DATAn represents a data byte (hexadecimal)
q is the termination of the file
For example:
@F000
31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
@FFFE
00 F0
Q
Restrictions:
- The number of sections is unlimited.
- The start address must be even.
- Each line must have 16 data bytes, except the last line of a section.
- Data bytes are separated by a single space.
- The termination tag q indicates end-of-file is mandatory.
To Next Page
Loading...