Texas Instruments TI-84 Plus Series User Manual

13 Using the TI-SmartView™ CE Calculator Emulator Workspace
The CE emulator state files will have a pre-configured filename TI84PCE Emulator
State_OS x-x-x_date.s84 where the file extension, *.s84 indicates that the file is a
TI-84 Plus CE emulator state created by the TI-SmartView™ CE software. A CE
emulator state file created in TI-SmartView™ CE v5.4.0 or higher will not load on
previous versions of TI-SmartView™ CE.
c) Click Save.
Loading an CE Emulator State
Because CE emulator state files are specific to each calculator model, you can only
load an emulator state file for the active calculator model.
1. Click Actions > Load Emulator State.
2. In the dialog box:
a) Navigate to the folder that contains the emulator state file.
Note: Only the CE emulator state files for the active calculator model will be
displayed.
b) Click the CE emulator state name to highlight it.
c) Click Open.

Texas Instruments TI-84 Plus Series Specifications

General

Brand	Texas Instruments
Model	TI-84 Plus Series
Category	Calculator
Language	English