Data Collection Using Vernier EasyData® App on the TI-
84 Plus CE Emulator
Vernier EasyData® CE App allows you to use Data Collection on the TI-84 Plus CE
emulator. The Vernier EasyData® CE App for TI-84 Plus CE comes pre-loaded on the
emulator in TI-SmartView™ CE. This App allows you to collect single sensor data
similar to using the App on the calculator.
Tips:
• Make sure you are familiar with collecting data using the EasyData® App on the
calculator prior to using TI-SmartView™ CE to collect data.
• Make sure you are familiar with the EasyData® CE App menu (File>New) or the
Scan shortcut key feature. You will use these features in the emulator to connect a
sensor to the emulator while the sensor is connected to the computer.
Using Vernier Sensors with TI-SmartView™ CE and EasyData® CE
App
If you already use Vernier sensors with the TI-84 Plus CE or TI-8x family calculator with
a mini-USB port, the sensor connects to the mini-USB port on the calculator.
Vernier sensors used with the TI-8x family (mini-USB) need the appropriate adapter to
connect (USB) to the computer for data collections demonstrations.
Adapters
Connect Sensor Type to Computer
Name Adapter Description
Easy to Go! Use this adapter to connect an EasyTemp or
EasyLink™ adapter to a computer for data
collection. See more
Go!Link Use this single-channel interface adaptor to
connect most Vernier sensors to your
computer. See more
Go!Motion
to
Computer
Cable
Use this cable to connect a Go!Motion or CBR 2
to a computer. It is included with Go!Motion.
See more
Data Collection Using Vernier EasyData® App on the TI-84 Plus CE Emulator 28
To Next Page
Loading...
Need help?
General
