29 Data Collection Using Vernier EasyData® App on the TI-84 Plus CE Emulator
Connect Sensor Type to Calculator
Name Adapter Description
EasyLink™ Use this adapter to link Vernier sensors to your
TI-84 Plus CE graphing calculator. EasyLink™ is a
single-channel interface that plugs into the USB
port of a TI-84 Plus graphing calculator or TI-
Nspire™ Handheld. See more
Go!to Easy
Adapter
(mini USB)
Use this adapter to connect a Go!Temp or
Go!Link™* to the USB port of a TI-Nspire™
handheld or TI-84 graphing calculator. See more
Go!Motion
to
Calculator
Mini-USB
port
Use this 72" cable to connect a Go!Motion or
CBR 2 to the USB port of a TI-Nspire™ handheld
or TI-84 graphing calculator. The cable has a USB
Mini-A plug that connects to the calculator and
a standard-B USB plug that connects to the
Go!Motion or CBR 2. The cable is included with a
CBR 2. See more
If Using for Classroom Demonstrations
Data collection using the EasyData® App is only supported on the TI-84 Plus CE
emulator for classroom demonstration purposes. If your class is using any TI-8x Family
calculator running the latest Vernier EasyData® App for that calculator, the
demonstration of data collection using TI-SmartView™ CE and the TI-84 Plus CE will be
parallel to the calculator experience on TI-8x Family calculators.
Single Sensors Data Collection
Single-sensor data collection is supported in the TI-84 Plus CE emulator (similar to the
TI-84 Plus CE calculator).
If a sensor is supported using the EasyData® App on the calculator via mini-USB, the
emulator in TI-SmartView™ CE provides a demonstration tool for data collection
similar to the experience on the calculator.
• CBR 2™ (Calculator-Based Ranger™) is supported with the USB cable.
• CBL 2™ (Calculator-Based Laboratory™ system) is not supported.
• The latest Vernier EasyData® CE App for TI-84 Plus CE comes pre-loaded in the
emulator.
• Older versions of the App are blocked in Emulator Explorer for the best data
collection experience.
To Next Page
Loading...
