Texas Instruments TI-84 Plus Series - Managing Data Collection Sessions; Session Control and Features

31 Data Collection Using Vernier EasyData® App on the TI-84 Plus CE Emulator
While EasyData® CE App is running on the CE emulator you may do the following:
Switch
Emulator
Workspace
You may switch emulators while EasyData® is running;
however, the data experiment will stop and the sensor will
disconnect from the CE emulator running the EasyData®
App. When you return to the CE emulator, you will need to
reconnect the sensor to EasyData® CE App using either
File>New or the “Scan” shortcut key in the EasyData® App
and begin a new data collection experiment. Previous
experiment data may or may not be stored. Always “QUIT”
the EasyData® CE App to store experiment data to the
emulator lists.
View
3
™ and
Apps
View
3
™ is not available (disabled) for all Apps other than
the Inequality Graphing App.
View
3
™ only displays screens from the ™ Operating System
and does not display App screens. We recommend that you
keep View
3
™ closed when not using this feature or if the
feature is disabled as when most Apps are running on the
emulator.
Switch to
Emulator
Explorer
Workspace
If EasyData® is running in the CE emulator and if you need
to use Emulator Explorer, please quit the EasyData® App
and then use Emulator Explorer.
Capture
Screens
You can capture EasyData® CE App screens while running
an experiment using Screen Capture.
Close and
Re-open
TI-
SmartView™
CE
You may close TI-SmartView™ CE while EasyData® is
running; however, the data experiment will stop and the
sensor will disconnect from the CE emulator running the
EasyData® App. When you return to the CE emulator, you
will need to reconnect the sensor to the EasyData® CE App
using either File>New or the “Scan” shortcut key in the
EasyData® App and begin a new data collection
experiment. Previous experiment data may or may not be
stored. Always “QUIT” the EasyData® CE App to store
experiment data to the emulator lists.
Additional help
If you need additional help using the EasyData® App with the calculator to collect data,
please see http://www2.vernier.com/manuals/easydata_guidebook.pdf for details.