Texas Instruments TI-Nspire Series User Manual

4 Getting Started with the TI-Nspire™ CX Handheld
Using Automatic Power Down™
To prolong battery life, the Automatic Power Down™ (APD™) feature
turns off the handheld after three minutes of inactivity. When this
happens, press
c to turn the handheld on and return to the last
document or last menu accessed. To change the default setting, press
c53 to access the Handheld Setup screen where you can change
the
Power Standby setting.
Note: For more information about setting up the handheld, see
Configuring Handhelds.
Choosing a Language
After the OS is loaded, select a preferred language.
1. Press ¢ to open the drop-down list.
2. Press 6 to scroll through the languages, and then press
x or ·
to select a language.
3. Press
e to highlight the OK button, and then press x or · to
save the language selection.
Choosing a Font Size
Next, select a font size for the display.
1. Press
¢ to open the drop-down list.

Texas Instruments TI-Nspire Series Specifications

General

Screen Resolution	320 x 240 pixels
Power Source	Rechargeable battery or AAA batteries (depending on model)
Operating System	TI-Nspire OS
Display Type	LCD
Connectivity	USB
Memory	64 MB RAM
Features	Computer Algebra System (CAS), graphing, spreadsheet, data analysis
Software	TI-Nspire software
Programming	Lua
Dimensions	Varies by model
Weight	Varies by model