Working in a TI-Nspire™ Navigator™ Teacher Software Classroom 57
Working in a TI-Nspire™ Navigator™
Teacher Software Classroom
If you are in a classroom where TI-Nspire™ Navigator™ Teacher Software
is used, you will need to log in to class to communicate with the teacher’s
computer. The teacher can communicate with your handheld in the
following ways:
•Send files
• Collect files
• Delete files
• Send Quick Polls and receive Quick Poll responses
The teacher can also pause and restart your handheld. When class is
paused, you will receive a message on your handheld. You cannot use
your handheld until the teacher releases the handheld from pause mode.
Pausing a Class Session
There are times when a teacher may want to pause a class. Pausing a class
suspends all activity on your handheld. When the teacher resumes class,
the message clears and you are able to use the handheld.
Logging In to Class
To log into class from a handheld with the 3.1 operating system,
complete the following steps to connect to a classroom session.
1. From the Home screen, press
55. From an open document, press
~8.
The
Login to Class dialog box opens.
To Next Page
Loading...
Need help?
General
