Texas Instruments TI-Nspire Series User Manual

76 Configuring Handhelds
Attaching a Wireless Adapter to a CX Handheld
The TI-Nspire™ CX Wireless Network Adapters work with the TI-Nspire™
CAS and TI-Nspire™ CX CAS handhelds. The battery in the TI-Nspire™ CX
handheld powers the wireless adapter. To connect the handheld to the
wireless adapter:
1. Position the wireless adapter on top of the handheld so the connector
on the adapter lines up with the connector on top of the handheld.
2. Slide the adapter into position, making sure the guides on the sides
of the adapter slide into the grooves on the sides of the handheld.
3. Firmly press the adapter into place so that the adapter sits on top of
the handheld as shown in the following illustration.
Wireless network adapter (school-owned)
Connector
Guides for
aligning with
handheld
Sideview of handheld
Groove to align
wireless adapter

Texas Instruments TI-Nspire Series Specifications

General

Screen Resolution	320 x 240 pixels
Power Source	Rechargeable battery or AAA batteries (depending on model)
Operating System	TI-Nspire OS
Display Type	LCD
Connectivity	USB
Memory	64 MB RAM
Features	Computer Algebra System (CAS), graphing, spreadsheet, data analysis
Software	TI-Nspire software
Programming	Lua
Dimensions	Varies by model
Weight	Varies by model